Suits clay and concrete interlocking tiles
Performance
Klober TrapacŪ Snow Guard Support
Klober TrapacŪ Snow Guard supports are the universal answer for preventing slipping snow on pitched roofs.
The support brackets are suitable for installation with flat and profiled concrete interlocking tiles.
The brackets are lightweight and easy to fit without the need for an additional support batten.
When the brackets have been installed they allow the easy insertion of the lightweight snow guard grid. The snow guard grids can be connected together by using the snow guard grid connectors.
Suitability
Clay and concrete interlocking tiles and a batten depth between 24 to 40mm. The complete thickness of the tile and the tile batten must not be greater than 57mm.
Installation
Determine the location of the Snow Guard Support Brackets usually within the 1st or 2nd course of tiles up from the eaves. Lay tiles to the course the brackets are being fixed, hook over the Support Brackets over the tiling batten and pull down over the batten and the tile. If the brackets are being installed within a profile tile, the brackets must be installed within the pan of the tile. The Support Brackets should be fixed at 600mm centres.
